NEWS-Bearings for Industrial Robots _ Bearings for New Energy Vehicles _ High-temperature Resistant Bearings - Official Website of Guoyang Precision Machinery

Complete Data of Bearing Model Comparison

2018/12/30

The basic code of a bearing is composed of the bearing type code, the dimension series code, and the inner diameter code. The basic code includes the type code, the dimension series code, and the inner diameter code. For example, for the bearing with the

What are the differences between thin-walled bearings and thick-walled bearings? What is a thin-walled bearing?

2020/07/16

Bearings are widely used in mechanical equipment and can be found in transmission and joint positions. However, there are many types of bearings, such as thin-walled bearings, angular contact ball bearings, roller bearings and so on. For different types o

How often should the car wheel hub bearing be replaced?

2020/06/13

How often should the wheel hub bearing of a car be replaced? The wheel hub bearing should be replaced every 100,000 kilometers. To determine the condition of a wheel bearing, factors such as the bearing's own quality, the vehicle's driving conditi

MYJ has developed an ultra-thin, high-precision angle sensor with an angular accuracy of up to ±0.1°.

2019/09/22

On April 20, 2017, MYJ Company announced the development of an [ultra-thin, high-precision angle sensor] that can detect angles with high precision. The expected possible application fields are in the joint parts of (precision) robots...

Double the service life of your bearings.

2020/06/13

The service life of a bearing refers to the number of revolutions or the number of hours that the bearing has experienced before pitting occurs under a certain load. For a bearing within this service life, initial fatigue should not occur on any of its be

YRT High-speed Turntable Bearing - The New Trend of High-speed Precision Transmission

2020/06/16

The YRT high-speed turntable bearing is exemplary in terms of precision. During the production process, advanced processing techniques and high-precision manufacturing equipment are employed. From the selection of raw materials to each processing procedur

How to solve the problem of overheating of the bearings in a CNC lathe? What are the impacts of overheated bearings?

2020/06/27

When processing parts on a CNC lathe, the bearings need to run at a high rotational speed along with the main shaft, and inevitably, there will be a problem of temperature rise. Normally, the bearings of CNC lathes are precisely designed, and the temperat

How many types of cages are there for angular contact ball bearings? How should one make a choice?

2020/06/16

Different cages are used in angular contact ball bearings, which have different impacts on performance such as temperature and rotational speed. When making a selection, it is necessary to comprehensively evaluate the requirements of the working condition

Introduction to the Commodities Related to the Robots of Guoyang Precision Machinery (GYJ)

2020/06/13

In recent years, against the backdrop of a shortage of manpower, FA (factory automation: automation of production processes) and IoT (Internet of Things) in manufacturing sites have been gradually gaining popularity. Robots are being used to carry out tas

Professor Wang Xiaolei from Nanjing University of Aeronautics and Astronautics visited Guoyang Precision Machinery Co., Ltd. and gave a talk at the 4th Advanced Technology Lecture.

2019/08/22

On August 8, 2019, at the invitation of Dr. Liu Mingjun, General Manager of Guoyang Precision Machinery, Professor Wang Xiaolei, Head of the Design Department of the College of Mechanical and Electrical Engineering at Nanjing University of Aeronautics and

27 pieces of data123 Next page

News Information